Devices for industry ZIP Gomel analyzers, indicators, etc.

Mass corrector for AN7529M and AN7560M devices

The mandatory set of the device includes:

• Measuring unit AN7529M (AN7560M) with built-in special communication unit.
• Laboratory scales SARTOGOSM VLT 150-P adapted to the measuring unit.
• The interface cable.

Industrial converter P-210MP

The P-210MP converter is designed to convert the EMF of the sensitive elements of primary converters used for potentiometric measurements of hydrogen ion activity (pH) and redox potential into continuous DC electrical output signals, as well as indication of measurement results.

The P-210MP is made in a monoblock design and is used in cases where the converter is removed from the submersible or main fittings at a distance of no more than 150 m.

Measuring multichannel recorder PM-2202

It is designed to measure DC power and voltage, DC resistance, pulse frequency measurement, measurement of non-electrical quantities converted into DC electrical signals or active resistance, output DC voltage to power external sensors, record and store measured data on a hard disk and display them in real time on the built-in display.

Electronic tachometer TE-02

The tachometer is designed to measure the rotational speed of single-shaft and multi-shaft machines and aggregates.

The tachometer provides information about the speed of rotation in digital form to the display unit, generates a current signal of 0...5 mA, proportional to the speed of rotation, and also provides technological alarm signals about exceeding the set settings while turning on the LEDs on the front panel of the tachometer.

Monitoring pressure regulator RDS-1

The RDS-1 monitoring pressure regulator is designed to automatically maintain a preset value of excess pressure of a liquid or gas at the outlet of the regulator relative to their changing pressure at its inlet. When working with the DPg-4M and DM-5M fittings, it ensures the functioning of the auxiliary flow electrode.

pNa-205 ionomer analyzer

The pNa-205 ionomer analyzer is designed for automatic continuous measurement of the activity and concentration of sodium ions, the EMF of the electrode system and the temperature of the controlled medium in nutrient and chemically desalinated water and steam condensate from high-pressure boilers and turbines, as well as in chemical control systems for H₊-cationite filters in ion exchange treatment plants for natural and wastewater.

The analyzer can be used in thermal power plants equipped with an automatic chemical control system for water treatment and water regime.

Industrial converters P-210, P-215M, P-215I

Industrial converters P-210, P-215M, P-215I are designed to convert the EMF of an electrode system into an electrical analog signal of direct current and voltage when measuring pH, pH and redox potential in technological aqueous solutions and pulps, in systems for automatic control and regulation of technological processes.

• P-210 is made in a monoblock design and is used in cases when the converter is removed from the submersible or main fittings at a distance of no more than 150 m.
• P-215M is made in a two-block design with a remote input amplifier and has no restrictions on the distance between the valve and the converter. The remote amplifier is installed near the valve.
• P-215I - has the type of explosion protection "intrinsically safe electrical circuit".

Konductometric concentrator KP-203

The KP-203 conductometric concentrate meter is designed to measure the concentration of aqueous solutions of NaCl, KCl salts, and the specific electrical conductivity of acids, salts, alkalis, and coagulants, as well as to measure the temperature of the analyzed medium.

Liquid conductometric analyzer KP-202

The KP-202 conductometer is designed for continuous measurement of the characteristics of aqueous and non-aqueous solutions of dissociating chemicals, such as:

• specific electrical conductivity with the possibility of thermal compensation;
• electrical resistivity with the possibility of thermal compensation;
• temperatures.

IKZ-02 Short circuit indicators

Designed to fix the short-circuit current flow of one or more damaged sections of a cable line up to 10 kV.

Alarms for the presence of CX-2 chromates and CX-2 cyanides in wastewater

Alarms for the presence of CX-2 chromates and CX-2 cyanides in wastewater are designed to signal that the concentration of hexavalent chromium and cyanides exceeds the established norm in automatic control systems at wastewater treatment plants.

AS-7932M Express Sulfur Analyzer

The AS-7932M express sulfur analyzer is designed to determine the mass fraction of sulfur in steels, alloys and other materials by automatic coulometric pH titration, for labeling analyses and express analyses for sulfur of products and raw materials of metallurgical and metalworking enterprises.

AN-7529M and AN-7560M Express Carbon Analyzer

The AN-7529M and AN-7560M express analyzers are designed to determine the mass fraction of carbon in steels, alloys and other materials by automatic coulometric pH titration for carbon labeling of products and raw materials of metallurgical and metalworking enterprises, as well as for other carbon analyses in laboratories of enterprises and research institutions of various types. branches of the national economy.

Models: AN-7529M, AN-7560M, AN-7560M without moustache, AS-7529M without moustache, AS-7529M with correc. masses, AS-7932M, AS-7932M without moustache, AS-7932M with correc. masses, VYAL.4078.005, VYAL.4078.005-01, VYAL.4078.005-02, IKZ-2, KP-202, KP-202.1, KP-202.2, KP-203, P-210, P-210MP, P-215, P-215I, P-215M, RDS-1, RM-2202, RM-2202/1, RM-2202/2, RM-2202/3, RM-2202/4, RM-2202/5, RTZ, CX-2, SC-2, TE-02, EE8003/2, pNa-205.